Q-Logic SANBOX2-64 manual Following is an example of the Set Setup System command

￿			B – Command Line Interface
				Set Setup Command
Trap5Severity	(see allowed options above)	[warning		]
Trap5Enabled	(True / False)	[False		]
ReadCommunity	(string, max=32 chars)	[public		]
WriteCommunity	(string, max=32 chars)	[private		]
TrapCommunity	(string, max=32 chars)	[public		]
AuthFailureTrap	(True / False)	[False		]

Do you want to save and activate this snmp setup? (y/n) [n]

The following is an example of the Set Setup System command:

SANbox2-64 N108 #> admin start
SANbox2-64 N108 (admin)	#> set setup	system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the			ENTER key to accept	the current value.
If you wish to terminate this process			before reaching the	end of the list
press ’q’ or ’Q’ and the ENTER key		to	do so.
Eth0NetworkAddress	(dot-notated	IP	Address)	[10.20.11.108 ]
Eth0NetworkMask	(dot-notated	IP	Address)	[255.255.252.0]
Eth0GatewayAddress	(dot-notated	IP	Address)	[10.20.8.254	]
Eth0NetworkDiscovery	(1=Static, 2=Bootp, 3=Dhcp, 4=Rarp)			[Static	]
AdminTimeout	(dec value 0-1440 minutes, 0=never)			[30	]
SecurityEnabled	(True / False)			[False	]
LocalLogEnabled	(True / False)			[True	]
RemoteLogEnabled	(True / False)			[False	]
RemoteLogHostAddress	(dot-notated	IP	Address)	[10.0.0.254	]

59043-01 A B-43