5 – Diagnostics/Troubleshooting | |
POST Diagnostics |
c.Activate binary mode and copy the configuration file from the workstation to the switch. The configuration file must be named "configdata".
ftp>bin
ftp>put configdata
d.Close the FTP session. ftp>quit
e.Establish communications with the switch using Telnet. Enter one of the following on the command line:
telnet xxx.xxx.xxx.xxx or
telnet switchname
where xxx.xxx.xxx.xxx is the switch IP address and switchname is the switch name associated with the IP address.
f.A Telnet window opens prompting you for a login. Enter an account name and password. The default account name and password are (admin, password).
g.Open an admin session to acquire the necessary authority. cli $>admin start
h.Restore the configuration file.
cli (admin) $>config restore
i.Reset the switch and close the Telnet session. cli (admin) $>reset
