Q-Logic SANBOX2-64 Section Planning, Section Installation, Virtual Private Fabric Hard Zones

SANbox2-64 Fibre Channel Switch		￿
Installation Guide
2.3	Fibre Channel Ports	2-7
2.3.1	Small Form-Factor Pluggable (SFP) Transceivers	2-8
2.3.2	Port Status LED	2-8
2.3.3	Port Modes	2-9
2.3.3.1	Fabric Ports	2-9
2.3.3.2	Translated Loop Port	2-10
2.3.3.3	Expansion Port	2-10
2.4	Ethernet Port	2-11
2.5	Serial Port	2-12
2.6	Power Supply Modules	2-13
2.7	Fans	2-14
2.8	Switch Management	2-15
Section 3	Planning
3.1	Devices	3-1
3.1.1	Public and Private	3-1
3.1.2	Redundancy and Latency	3-2
3.2	Multiple Chassis Fabrics	3-4
3.2.1	Domain ID, Principal Priority, and Domain ID Lock	3-4
3.2.2	Common Topologies	3-5
3.3	Performance	3-6
3.3.1	Distance	3-6
3.3.2	Bandwidth	3-7
3.3.3	Latency	3-7
3.4	Device Access	3-8
3.4.1	Soft Zone	3-9
3.4.2	Access Control List Hard Zone	3-9
3.4.3	Virtual Private Fabric Hard Zones	3-10
3.5	Fabric Management	3-10
3.6	Fabric Security	3-11
Section 4	Installation
4.1	Site Requirements	4-1
4.1.1	Fabric Management Workstation	4-1
4.1.2	Switch Power Requirements	4-1
4.1.3	Environmental Conditions	4-2
4.2	Installing a Switch	4-2
4.2.1	Mount the Switch	4-3
4.2.2	Install SFP Transceivers	4-5
4.2.3	Connect the Switch to AC Power	4-5

Page iv 59043-01 A