Q-Logic SANBOX2-64 manual Help Command, Help command keyword, Keyword, All

￿		B – Command Line Interface
		Help Command
Help Command
	Displays a brief description of the specified command and its keywords.
Authority	User
Syntax	help [command] [keyword]
Keywords	[command]
	Displays a summary of the command given by [command] and its keywords. If you
	omit [command], the system displays all available commands from which to
	choose.
	[keyword]
	Displays a summary of the keyword given by [keyword] belonging to the
	command given by [command]. If you omit [keyword], the system displays the
	available keywords for the specified command.
	all
	Displays a list of all available commands (including command variations).
Examples	The following is an example of the Help Set command:
	SANbox2-64 N108 #> help set

set SET_OPTIONS

There are many attributes that can be set.

Type help with one of the following to get more information: set alarm

set beacon set blade

set config blade set config port set config ports set config switch set config threshold set config zoning set log

set pagebreak set port

set setup snmp set setup system set switch

The following is an example of the Help Set Beacon command:

SANbox2-64 N108 #> help set beacon set beacon On Off

This command allows the LEDs on the front of the switch to flash.

The On option will start and the Off option will stop the flashing.

59043-01 A B-11