Section VIII - Power$ync II™ Operation
Press F2 at the Compressor Setup Menu to access the Maintenance Menus. There are four main Compressor Maintenance Menus that allow the operator to check or reset maintenance hourmeters, time and date, view diagnostics, and set modem baud rate. The operator can also access the compressor configuration information. Once in the Compressor Maintenance Menu, use the UP and DOWN arrow keys to move between menus. Compressor Maintenance Menu 1 contains maintenance hourmeters and time and date information.
COMPRESSOR MAINTENANCE MENU 1
MAINTENANCE HOURMETERS ➔ PRESS F1
TIME AND DATE ➔ PRESS F2
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
To access maintenance hourmeters, press F1. To move to another maintenance menu, press the UP arrow key.
The Compressor Hourmeter Menu allows access to compressor hourmeters that include loaded hours, unloaded hours, lubricant hours, line filter hours, intake filter hours, and lubricant filter hours. It also allows these hourmeters to be reset when maintenance is performed.
COMPRESSOR HOURMETER MENU
COMPRESSOR HOURMETERS | ➔ PRESS F1 |
FILTER SERVICE HOURMETERS | ➔ PRESS F2 |
RESET SERVICE HOURMETERS | ➔ PRESS F3 |
Press F1 to access loaded and unloaded, lubricant and line filter hourmeters. Press ENTER to return to the previous display.
LOADED HOURS _____ UNLOADED HOURS _____
HOURS SINCE LAST FLUID CHANGE _____
******************************************
PRESS ENTER TO RETURN
This display shows the number of hours that the compressor has been running at some load level and the number of hours that the compressor has been running unloaded. Logging these hourmeter readings will help determine if changes to sequence or schedule routines should be made in network applications. Logging fluid hours and comparing them to the results of the fluid analysis will allow the advance scheduling of fluid changes. Comparing fluid hours to analysis reports and temperature logs will also aid in diagnosing ambient conditions which might be shortening fluid life. Press ENTER to return to the hourmeter menu.
Press F2 at the Compressor Hourmeter Menu to access the filter hourmeters.
INTAKE FILTER HOURS _________
LINE FILTER HOURS ____________
*******************************
PRESS ENTER TO RETURN
Inlet filter, and fluid filter hours can be logged to help anticipate preventative maintenance. Line filter hours refers to the control line filter that assures clean air to the pneumatic controls on the compressor package. This hourmeter is a reminder that, although there is no element to change and the filter automatically drains, its operation should be checked periodically. An improperly operating control line filter will affect the proper operation of the compressor controls. Press ENTER to return to the Compressor Hourmeter Menu.
Quincy Compressor® - QSD™ | 51 |
|
|
