Section VIII - Power$ync II™ Operation
Press F3 at the Compressor Hourmeter Menu to access three additional menus used to reset maintenance hourmeters after service has been performed. To scroll through these three reset menus, use the UP and DOWN arrow keys.
RESET HOURMETER MENU 1
RESET FLUID FILTER HOURS ➔ PRESS F1
RESET FLUID HOURS ➔ PRESS F2
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
Press F1 to reset the fluid filter hourmeter after replacement.
A confirmation message will be displayed before the hourmeter is actually reset.
PRESS F1 TO RESET FLUID FILTER HOURS
PRESS ENTER TO RETURN
If this is the correct hourmeter to reset, press F1 again. If this is not the hourmeter that needs to be reset, press ENTER to return to the previous menu.
After pressing F1, another message confirms that the hourmeter has been reset.
FLUID FILTER HOURS RESET TO 0
PRESS ENTER TO RETURN
Press ENTER to return to the Reset Hourmeter Menu 1.
From the Reset Hourmeter Menu 1, press F2 to reset the fluid hourmeter. A confirmation message will be displayed before the hourmeter is actually reset.
PRESS F1 TO RESET FLUID HOURS
PRESS ENTER TO RETURN
If this is the correct hourmeter to reset, press F1 again. If this is not the hourmeter that needs to be reset, press ENTER to return to the previous menu.
FLUID HOURS RESET TO 0
PRESS ENTER TO RETURN
Press ENTER to return to the Reset Hourmeter Menu 1.
RESET HOURMETER MENU 2
RESET LINE FILTER HOURS | ➔ PRESS F1 |
RESET INTAKE FILTER HOURS | ➔ PRESS F2 |
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
From the Reset Hourmeter Menu 2, press F1 to reset the line filter hourmeter. A confirmation message will be displayed before the hourmeter is actually reset.
From the Reset Hourmeter Menu 2, press F2 to reset the inlet air filter hourmeter.
PRESS F1 TO RESET AIR FILTER HOURS
PRESS ENTER TO RETURN
If this is the correct hourmeter to reset, press F1 again. If this is not the hourmeter that needs to be reset, press ENTER to return to the previous menu.
AIR FILTER HOURS RESET TO 0
PRESS ENTER TO RETURN
Press ENTER to return to the Reset Hourmeter Menu 2.
COMPRESSOR MAINTENANCE MENU 1
MAINTENANCE HOURMETERS ➔ PRESS F1
TIME AND DATE ➔ PRESS F2
UP FOR NEXT MENU/DOWN FOR PREVIOUS MENU
To view or set time, date, and day of the week, press F2. To scroll to another Maintenance Menu, use the UP and DOWN arrow keys. To return to the previous display, press ENTER.
52 | Quincy Compressor® - QSD™ |
|
|
