Samsung BQ2Q7G214/BOL Door Removal, Door Glass Removal, Water Collector Cleaning, Completely

DOOR REMOVAL

For normal use, the oven door must not be removed but if removal is necessary, for example, for cleaning purposes, follow these instructions.

CAUTION: The oven door is heavy.

2

70

1

cleaning

1.Open the door 2. Close the door by

and flip open	approximately 70 °. With
the clips at	both hands, grasp the
both hinges	sides of the oven door at its
completely.	middle and pull-lift until the
	hinges can be taken out.

DOOR GLASS REMOVAL

3.After cleaning, for attaching the door repeat the 1 and 2 steps in revers order. The clip on the hinge should be closed on both side.

and care

The oven door is equipped with 3 sheets of glass placed against each other. These sheets can be removed for cleaning.

WARNING: The oven door must be removed from the oven for cleaning the door glasses.

1.Remove 2 screws on the left and right sides of the door.

Glass 1

2 Guide rubbers

2.Detach the cover and remove glass 1, 2 and 2 guide rubbers from the door.

Cover

Guide rubbers (Right and Left)

Glass 2

Glass 1

3.After cleaning the door glasses, for assembly repeat 1, 2 steps in revers order. Check the right locations of glasses with above picture.

The quantity of door glass is different from 3 EA to 4 EA model by model.

Important: When assembly the inner glass 1, make sure not to use glass 2 and put printing to direction below.

WATER COLLECTOR CLEANING

The water collector is for collecting the water from the moisture when oven is operating with very moist food. Food waste can be stack on the water collector. If the cleaning is not performed, the built-in furniture can be damaged. Clean the water collector to protect your furniture after cooking.

WARNING: If you encounter a water leakage from the water collector after the cooking, please contact us at the service center.

Water collector

cleaning and care _45

BQ2Q7G214- BOL-DG68-00447J-01_EN.indb 45

7/5/2013 11:36:09 AM