4Pull up on the stacker lever and then close the stacker front cover.

Paper jam at exit of finisher

1Gently pull the paper out through the exit area.

2Close the side cover. Printing automatically resumes.

Understanding display messages

Messages appear on the Smart Panel program window or on the control panel display to indicate machine status or errors. Refer to the tables below to understand the messages meaning to correct the problem, if necessary. Messages and their explanations are listed in alphabetical order.

Note

• If the message is not in the table, cycle the power and try the printing job again. If the problem persists, call for service.

•When you call for service, it is very convenient to provide the service representative with the contents of display message.

Some messages may not appear in the display depending on options or models.

[xxx] indicates the part of the each toner cartridge or each imaging unit.

[yyy] indicates the part of the machine.

[zzz] indicates the error code. When you contact the service center, this error code help to handle the problem.

• You may see an exclamation mark ( ) or a cross mark ( ) on the upper left of the display, in that case, press the question mark to browse detailed information on the supplies.

Message

Meaning

Suggested solutions

 

 

 

[yyy] is worn.

The life of the part

Replace the part with

Replace with new

expires totally.

a new one. Call for

one

 

service.

 

 

 

[xxx] imaging unit

The toner in the

Replace the imaging

is empty. Replace

imaging unit has run

unit with a Samsung-

it

out.

genuine toner

 

 

cartridge.

 

 

 

[xxx] imaging unit

The imaging unit you

Install a Samsung-

is not compatible.

have installed is not

genuine imaging unit,

Check userís

for your machine.

designed for your

guide

 

machine.

 

 

 

[xxx] imaging unit

The imaging unit is

Install the imaging

is not installed.

not installed, or the

unit. If it is already

Install it

CRUM (Consumer

installed, try to

 

Replaceable Unit

reinstall the imaging

 

Monitor) in the

unit.

 

cartridge is not

If the problem

 

connected.

 

persists, please call

 

 

for service.

 

 

 

[xxx] imaging unit

The imaging unit is

Replace a imaging

is worn. Replace

at the end of its life.

unit with a Samsung-

with new one

When the imaging

genuine imaging unit.

 

unit replacement

(Page 11.5)

 

message appears

 

 

on the screen and if

 

 

you select

 

 

Continue, this

 

 

message displays.

 

 

 

 

12.11 <Troubleshooting>

Page 107
Image 107
Samsung CLX-8380ND manual Understanding display messages, Paper jam at exit of finisher