5.5 <

Copying>
4Press Start on the control panel.
Then the machine starts scanning the front side.
5Turn the original over and place it on the scanner glass, where
arrows indicate as shown. Then, close the scanner lid.
6Press Start on the control panel to begin copying.
Copying ID with the manual ID copy option
If you want to copy several ID cards on a paper, or adjust the copying
position of the page, follow the next steps.
Next steps are the procedure when you copy two people's driver's license
cards (100mm X 80mm) in one page.
1Press Machine Setup on the control panel.
2Select Admin Setting. When the login message pops up, then
enter password and press OK.
3Press the Setup tab > Copy Setup > Mamual ID Copy Setup.
4Press the number from the template list table.
5Press Edit Template.
6Selec the appropriate option values and press OK.
•Template Name: Enter the template name.
•Scan Position: Select the position for scanning. You should select
the largest scanning position out of the originals.
LEFT, TOP : X-000mm/Y-000mm, RIGHT, BOTTOM: X-110mm/Y-
090mm
Note
If this option is grayed out, select the Duplex option to 1 -> 1
Sided.
•Number of Images: Select how many images are on a page.
(select number 4.)
•Image Position: Select the position of a page which images are
on. If you choose to copy four images, you have to select four
positions here.
•First Image Position: LEFT, TOP : X-000mm/Y-020mm, RIGHT,
BOTTOM: X-100mm/Y-100mm
•Second Image Position: LEFT, TOP : X-105mm/Y-020mm,
RIGHT, BOTTOM: X-205mm/Y-100mm
•Third Image Position: LEFT, TOP : X-000mm/Y-150mm, RIGHT,
BOTTOM: X-100mm/Y-230mm
•Forth Image Position: LEFT, TOP : X-105mm/Y -150mm, RIGHT,
BOTTOM: X-205mm/Y-230mm
7Press OK, the template you have saved will be shown in the
template list table.
8Press and select Copy.
9Press the Advanced tab > ID Copy > Mamual ID Copy Setup.
10 Press the template you have saved from the template list.
11 Press the Start button on the control panel. now follow the
instruction on display to finish the ID copy for four images.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4
pages onto one sheet of paper.
1Load the originals, face up, in the DADF. (Page4.1)
2Press Copy from the Main screen.
3Select the tray in Paper Supply.
4Press the Advanced tab > N-Up.
5Select Off, 2Up, or 4Up.
•Off: Copies an original onto one sheet of paper.
•2Up: Copies two separate originals onto one page.
•4Up: Copies four separate originals onto one page.
6Press Start on the control panel.
1 2
2-up copying 4-up copying