Note
To remove shadows of a book edge, press the Image tab > Erase Edge > Book Center and Edge Erase.
4Select the binding option.
•Off: Disables this feature.
•Left Page: Prints left page of the book.
•Right Page: Prints right page of the book.
•Both Page: Prints both facing pages of the book.
5Press OK.
6Press Start on the control panel to begin copying.
Booklet copying
The machine automatically prints on one or both sides of the paper, which are then folded to produce a booklet with all of the pages in the correct sequence.
The machine will also reduce and correctly adjust the position of each image to fit on the selected paper.
1Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1)
2Press Copy from the Main screen.
3Select the tray in Paper Supply.
4Press the Advanced tab > Booklet.
5Press On to activate this feature, and select detailed settings for each option.
•1 Sided Original: Copys on one side of the paper.
•2 Sided Original: Copys on both sides of the paper.
6Press OK.
7Press Start on the control panel to begin copying.
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio, JIS B5, ISO B5, Executive, A5 and Statement sized paper.
Cover copying
The machine automatically adds covers to your copied set using stock taken from a different tray. Covers must be the same size and orientation as the main body of the job.
1Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1)
2Press Copy from the Main screen.
3Select the tray in Paper Supply.
4Press the Advanced tab > Covers.
Note
Once you have set the Paper Supply option to Auto, you cannot use this feature.
5Press On to use this feature, and select detailed settings for each option.
•Position: Selects whether the cover will be placed at the front, back, or both.
•Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or blank paper.
•Paper Source: Select the paper tray, where the cover sheet is loaded.
6Press OK.
7Press Start on the control panel to begin copying.
Transparency copying
When you prepare transparencies for presentations, use this feature to copy the information.
Note
Before you start this special copy job, set the tray's Paper Types and Paper Size to Transparency.(Page 4.9)
1Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1)
2Load the
3Set the paper type to Transparency.
4Press Copy from the Main screen.
5Press the Advanced tab > Transparencies.
6Select Transparencies option.
•No Separator: Does not place separator sheets between transparencies.
•Blank Sheet: Places a blank sheet between transparencies.
•Printed Sheet: Places the same image on the divider sheets as printed on the transparency.
7Select media sources, in case you selected either Blank Sheet or Printed Sheet.
8Press OK.
9Press Start on the control panel to begin copying.
Erasing edges
5.7 <Copying>
