Samsung CLX-8380ND manual Adjusting the document settings

Note

• If you have set your machine to this mode and your answering machine is switched off, or no answering machine is connected to EXT socket, your machine automatically goes into Fax mode after a predefined number of rings.

•If your answering machine has a user-selectable ring counter, set the machine to answer incoming calls within 1 ring.

•If you are in Telephone mode when the answering machine is connected to your machine, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation.

•While the machine is receiving a fax, you can not do the copy job.

Receiving faxes manually using an extension telephone

This feature works best when you are using an extension telephone connected to the EXT socket on the back of your machine. You can receive a fax from someone you are talking to on the extension telephone, without going to the fax machine.

When you receive a call on the extension phone and hear fax tones, press the keys 9 on the extension phone. The machine receives the fax.

Press the buttons slowly in sequence. If you still hear the fax tone from the remote machine, try pressing 9 once again.

To change the 9 to, for example, 3 , follow the next steps.

1Press Machine Setup on the control panel.

2Select Admin Setting. When the login message pops up, then enter password and press OK. (Page 3.5)

3Press the Setup tab > Fax Setup > Receive Start Code.

4Select On.

5Press left/right arrows to display number 3.

6Press OK.

Receiving in secure receiving mode

You may need to prevent your received faxes from being accessed by unauthorized people. You can turn on secure receiving mode to restrict printing of received faxes when the machine is unattended. In secure receiving mode, all incoming faxes go into memory.

1Press Machine Setup on the control panel.

2Select Admin Setting. When the login message pops up, then enter password and press OK. (Page 3.5)

3Press the Setup tab > Fax Setup > Secure Receive.

4Select On.

5Enter Passcode with 4 digit number using the number keypad on the control panel.

Note

To deactivate the Secure Receive feature, press Off. In this case, the received fax will be printed out.

Printing received faxes on both sides of the paper

Set this duplex feature to save paper. When the machine prints the received fax data, it prints them on both sides of the paper.

1Press Machine Setup on the control panel.

2Select Admin Setting. When the login message pops up, then enter password and press OK. (Page 3.5)

3Press the Setup tab > Fax Setup > Received Fax Printing > Duplex.

4Select appropriate option.

•Off: Prints only one side of the paper.

•Long Edge: Prints both sides of the paper, however the binding will be the long edge.

•Short Edge: Prints both sides of the paper, however the binding will be the short edge.

5Press OK.

Receiving faxes in memory

Since your machine is a multi-tasking device, it can receive faxes while you are making copies or printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes in its memory. Then, as soon as you finish copying or printing, the machine automatically prints the fax.

Adjusting the document settings

Before sending a fax, you can adjust the document settings, such as resolution, darkness, color, duplex and so forth. Refer to explanation of this section.

Note

The document setting herein is for only current job. If you want to change the default setting on document settings, refer to Admin Setting > General tab > Default Settings. (Page 10.2)

Duplex

This function is especially intended for two-sided originals. You can select whether the machine sends the fax on one side or both sides of the paper.

Load the originals onto the DADF to use this function.

6.5 <Faxing (Optional)>