Samsung CLX-8380ND Using special copy features, Selecting the type of originals, ID card copying

•Reverse 2 -> 2 Sided: Scans the both sides of originals and prints them on both sides of a paper. But the machine reverses the print out order of the originals. The machine prints the back sides of originals first, which means the front sides of originals is printed on the back side of a paper.

Deciding the form of copy output (Collated / Staple)

Press the Basic tab > Output, then use left/right arrows to select Collated or Stapled. This feature is supported only when the original is on the DADF.

Note

If you want to copy originals on the scanner glass and copy both sides of original, the message Another Page? appears after the first page copied. At this time, load the original’s the other side facing down and press Yes, then the machine starts scanning the second page of your original.

Press more to see the values.

•Collated: Prints output in sets to match the sequence of originals.

•Uncollated: Prints output sorted into stacks of individual pages.

•Staple, Portrait: Adds a single staple to all of your portrait- oriented output.

•Staple, Landscape: Adds a single staple to all of your landscape- oriented output.

Note

The Staple feature is available with an optional stacker & stapler. (Page 13.1)

Selecting the type of originals

Press the Basic tab and select an appropriate original type.

•Text: Use for originals containing mostly text.

•Text/Photo: Use for originals with mixed text and photographs.

•Photo: Use when originals are photographs.

•Magazine: Use when originals are magazines.

Changing the darkness

This defines the degree of darkness. Use left/right arrows to change the level of light/dark in the printouts.

Using special copy features

On the Advanced tab or the Image tab of the Copy screen, you can select specific copy features.

ID card copying

The machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a business card.

Note

The original must be placed on the scanner glass to use this feature.

1Place the front side of an original facing down on the scanner glass where arrows indicate as shown, and close the scanner lid.

2Press Copy from the Main screen.

3Press the Advanced tab > ID Copy.

5.4 <Copying>