5.Use the up/down (▲▼) button to move to a desired item.
•USER ID: Select a user ID.
You will have a total of 10 IDs available including Admin.
-ADMIN: The administrator can set and perform all features of the DVR.
-MANAGER: Can change the password and perform backup. Can access menus of Client Setup, Backup, Player, Search, and Remote Viewer using the Web Viewer.
| PASSWORD SETUP |
USER ID | ADMIN |
USER PW | - - - - - - - - |
NEW PW | - - - - - - - - |
CONFIRM | - - - - - - - - |
0 1 2 3 4 5 6 7 8 9
ENTERESC
-USER: Can change the password and perform
backup. Can access menus of Client Setup, Player, and Remote Viewer using the Web Viewer.
•USER PW: Provide the default password.
•NEW PW/CONFIRM: Provide a new password.
6.Provide a new password and select <ENTER> to apply the new password; if you enter an invalid password, an error message will appear.
7.When done, select <ESC>. Your setting will be applied.
Buzzer Setup
SETUP
You can set whether to use the buzzer sound.
See the previous section to repeat steps 1~3. (Page 30)
4.Use the up/down (▲▼) button to select <BUZZER SETUP>, and press [OK].
The “BUZZER SETUP” screen appears.
CONFIGURATION
HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP
|
| ESC |
5. Use the up/down (▲▼) button to move to a desired item. |
|
|
| BUZZER SETUP | |
• KEY TONE: Set the key tone of the button. | KEY TONE | OFF |
• VIDEO LOSS: Set to sound the buzzer if a video loss | VIDEO LOSS | OFF |
ALARM ACTIVE | OFF | |
occurs. | MOTION DETECT | OFF |
•ALARM ACTIVE: Set to sound the buzzer on a sensor signal input.
•MOTION DETECT: Set to sound the buzzer when a
motion is detected.
OK
DEFAULTESC
6.When done, select <OK>. Your setting will be applied.
If you select <DEFAULT>, the settings will be restored to the factory default.
7.To return to the previous menu, select <ESC>.
English _35
