![](/images/new-backgrounds/1333690/33369091x1.webp)
setup
Load Setup
1.Connect the USB device where your settings are saved.
2.Select <LOAD SETUP>.
The DVR settings will be changed to your settings with a message of “LOAD SETUP SUCCESS” on the screen.
It takes 5 to 10 seconds, depending on the USB device. This will change the DVR settings, not the factory default.
FACTORY DEFAULT
ALLOFF
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DISPLAY SETUP | OFF |
RECORD SETUP | OFF |
SCHEDULE SETUP | OFF |
CAMERA SETUP | OFF |
CONFIGURATION | OFF |
EXTERNAL DEVICE | OFF |
CHANGE FACTORY DEFAULT |
|
LOAD SETUP |
|
SAVE SETUP |
|
DEFAULT | ESC |
LANGUAGE
You can select a language to your preference.
1.Use the up/down (▲▼) button to select a language. The selected language will be applied immediately.
MAIN MENU
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE | ENGLISH |
SHUTDOWN
EXIT
46_ setup