![](/images/new-backgrounds/1333690/33369083x1.webp)
setup
5.Use the up/down (▲▼) button to move to a desired item.
•SWITCHING INTERVAL: Specify the switching interval for the spot monitor.
•ALARM POPUP: Set to display a popup message if an alarm signal is detected.
•MOTION POPUP: Set to display a popup message if a motion signal is detected.
SPOT SETUP
SWITCHING INTERVAL | 03 SEC |
ALARM POPUP | OFF |
MOTION POPUP | OFF |
EVENT POPUP DURATION | 05 SEC |
• EVENT POPUP DURATION: Specify the event popup |
| OK | |
DEFAULT | ESC | ||
duration. | |||
|
|
6.When done, select <OK>. Your setting will be applied.
If you select <DEFAULT>, the settings will be restored to the factory default.
7.To return to the previous menu, select <ESC>.
BACKUP
You can backup HDD recording data on a USB storage device.
Backup
1.Press the [MENU] button on the front panel or remote control.
The “DVR
2.Enter the password and select <ENTER>. The “MAIN MENU” screen appears.
3.Use the up/down (▲▼) button to select
The
MAIN MENU
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE | ENGLISH |
SHUTDOWN
EXIT
4.Connect the USB device and select <CHECK USB>. A device list of the search results will appear with device information.
BACK-UP
HDD |
|
|
|
START | 2009/ 05/01 | 00:00:06 | |
END | 2009/ 05/01 | 00:00:20 | |
MEDIA |
|
|
|
PARTITION |
|
|
|
START | / | / | : : |
END |
|
|
|
SIZE | MB | MB |
CHECK USB | ESC |
42_ setup