live
EVENT MONITORING ON THE SPOT MONITOR
Apart from the Live screen, you can use the spot monitor to monitor an event from a specifi c channel through the SPOT OUT port.
1.Specify an interval and use of the popup in “EXTERNAL DEVICE > SPOT SETUP”.
According to your settings, the spot monitor will be activated when an event occurs.
For more information, refer to “SPOT SETUP”. (Page 41)
SPOT SETUP
SWITCHING INTERVAL | 03 SEC |
ALARM POPUP | OFF |
MOTION POPUP | OFF |
EVENT POPUP DURATION | 05 SEC |
OK
DEFAULTESC
•The spot monitor is defaulted to Auto Sequence according to the interval.
If multiple events occur simultaneously, the events from the lower channel will be notifi ed fi rst with popup messages.
•If the spot monitor switches from channel 1 (the fi rst event) to channel 2 (the second one), a new event from channel 1 within the event popup duration will not display a new popup.
Spot Event Popup
Event Occurs | Event Occurs |
Popup Duration
CH1 | CH2 |
24_ live
