Samsung SHR-3040P If using a router, Using DVR Static IP, DVR Network, Router Dhcp IP Address

MAC ADDRESS DHCP MODE

IP PORT

IP ADDRESS GATEWAY SUBNET

If using a router

Check the followings to prevent a possible confl ict with the static IP of the DVR.

Network	IP Router
	LAN
	DSL Modem

LAN

SHR-3040

Using DVR Static IP

Internet Connection : You can connect the DVR to a ADSL/Cable modem-based IP router, or to the IP router in the LAN environment.

DVR Network

 SETUP

1.Set <DHCP MODE> to <MANUAL> in “MAIN MENU >

EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP”.

2.Check if the IP is a static IP provided by the router.

For information about the IP, gateway, and subnet mask, contact your network administrator.

IP SETUP

00-0A-A2-08-08-F3

MANUAL

IP DETECT

50000

192.168.000.200

192.168.000.001

255.255.255.000

M	 If the start (192.168.0.100) and end address	BANDWIDTH	HIGH (1.5Mbps↑)
	(192.168.0.200) of the DHCP server are already	WEB SERVER PORT	00080
			OK
	specified, provide other addresses (192.168.0.201~192.		ESC
	168.0.524).
	Check if the settings of the gateway and subnet mask match those of the IP router.

Router DHCP IP Address

1.To access the IP router menu, provide the router address in the address bar of the Internet browser from a local PC in connection with the IP router.(ex: http://192.168.1.1)

2.Then, specify the network settings of the local PC as follows:

Ex) IP: 192.168.1.2

Subnet mask: 255.255.255.0

Gateway: 192.168.1.1

3.Use the address to connect to the IP router and open the setup page.

Access the DHCP setup menu of the IP router where you can select the DHCP server mode and specify the start and end address.

Provide the start (192.168.0.100) and end (192.168.0.200) address, respectively.

The network settings may differ depending on the IP router.

English _49