![](/images/new-backgrounds/1333690/33369073x1.webp)
6.Use the up/down (▲▼) button to move to a desired item.
•MAC ADDRESS: Shows information of the network that is assigned to the DVR.
•DHCP MODE: If you set this to <AUTO>, IP address and other network settings will be assigned from the DHCP server. (Only the IP port can be set manually)
If you set this to <MANUAL>, you can specify all of the settings below:
•IP PORT, IP ADDRESS, GATEWAY, SUBNET: Manually enter the value according to the network environment if you set the DHCP Setup to Manual.
7.When done, select <OK>. Your setting will be applied.
8.To return to the previous menu, select <ESC>.
| IP SETUP |
|
MAC ADDRESS | ||
DHCP MODE |
| MANUAL |
|
| IP DETECT |
IP PORT |
| 50000 |
IP ADDRESS | 192.168.001.160 | |
GATEWAY | 192.168.001.001 | |
SUBNET | 255.255.255.000 | |
BANDWIDTH | HIGH | (1.5Mbps↑) |
WEB SERVER PORT |
| 00080 |
|
| OK |
ESC
SETUP
DDNS Setup
You can specify a DDNS site to access when a remote user connects to the network.
What is DDNS?
DDNS is an acronym for Dynamic DNS(Domain Name System).
DNS(Domain Name System) is a domain service to redirect the IP address (ex: 64.233.189.104) to a
name that the user can remember with ease (ex: www.google.com).
DDNS(Dynamic DNS) is the IP registration service that registers a domain name that the user remembers and a changed IP address with the DDNS server so that the user can redirect to the registered domain name if the previous IP address is changed in a dynamic IP environment.
Checking the DDNS Address
A DDNS address consists of <English lower case “g”> + <MAC address 6 digits from the end> + <websamsung.net>.
Ex) If 6 digits of the MAC address of the DVR are <00:00:f0> from the end: g + 0000f0 + websamsung.net = g0000f0.websamsung.net
See the previous section to repeat steps 1~4. (Page 36)
5.Use the up/down (▲▼) button to select <DDNS SETUP>, and press [OK].
The “DDNS SETUP” screen appears.
6.Use the up/down (▲▼) button to move to a desired item.
•DDNS ENABLE: Set whether to use the DDNS.
•DDNS STATUS: If you set DDNS Enable to <ON>, you will see a message of the status of the DDNS on the screen.
7.When done, select <OK>. Your setting will be applied.
8.To return to the previous menu, select <ESC>.
| DDNS SETUP |
DDNS ENABLE | OFF |
| REGISTER |
DDNS STATUS |
|
http://g0808f3.websamsung.net:80
OK
ESC
English _37