Samsung SMO-150MP/UMG, SMO-150TRP manual Troubleshooting, Eng-17

Troubleshooting

You may encounter an unexpected problem while using this system that makes it hard to use the system properly. In many cases, however, they are minor problems rather than serious flaws in the system.

Refer to the following tips for some possible solutions.

When power will not come on	• Make sure that the cord is
	properly plugged in.
	• Check the power cable.
When the screen does not appear	• Check the connections with
	the camera, accessories and the
	external monitor.
When record is not working	• Make sure the Video In port
	of the VCR and the VCR
	Accessory Video Out port of this
	system are properly connected.
	• Check if the tape inserted into
	the VCR is able to record.
	• Check that the REC Trigger Out
	port of the Time Lapse VCR is
	properly connected to the VCR
	Accessory TRIGGER (6PIN
	VCR ACCESSORY) port of this
	system when you record in the
	Time Lapse Mode.
When playback is not working	• Make sure the Video Out port of
	the VCR and the VCR Accessory
	Video In port of this system are
	properly connected.
	• Check if the Display Mode of
	this system is in P.B. Mode or
	Triplex Mode.

When the screen does not appear in the Auto Sequence Switch Mode

•Check that the screen is in Live Mode.

•Check that the time of “SEQUENCE” under the SETUP MENU is properly set.

If the problem persists, contact the local sales representative or service center for support.

Note

If the problem is related to VCR recording or playback, check the VCR as well.

Eng-17