Seiko Group TM-L60 manual Adjusting the Paper-end Detector, Paper-end detector

3-2 Adjusting the Paper-end Detector

nThe paper-end detector

The paper-end detector senses when the paper is nearing its end and turns on the PAPER lamp.

The paper-end detector can be adjusted according the thickness of the paper.

nHow to adjust the paper-end detector

Roll paper may differ in spool size, so it may be necessary to adjust the paper-end detector.

Use the specified thermal paper roll with a core inside diameter (d1) of 12 mm and an outside diameter (d2) of 18 mm, or the specified thermal label paper with a core inside diameter (d1) of 12 mm and an outside diameter (d2) of 22 mm.

The thickness of the spool can vary; use the table to determine the paper-end detector adjustment.

Table 3-l. Adjustment Values of the Paper-end Detector

Adjustment	Dimension of T (mm)
Value
	Specified thermal paper	Specified thermal label paper
# l	Approx. 0	Do not use
#2	Approx. 2	Approx. 0
#3	Approx. 4	Approx. 2
#4	Approx. 6	Approx. 4
#5	Approx. 8	Approx. 6
#6	Approx. 10	Approx. 8
	d2 018 (specified thermal paper)
	022 (specified thermal label	paper)

10