|
| APPENDIX |
|
|
|
|
|
|
| ||
| APPENDIX A General Specifications | ||||
|
|
|
|
|
|
| 1. Printing specifications |
|
|
|
|
| Printing method: | Thermal line printing | |||
| Dot density: | 180 dpi |
|
|
|
| Printing direction: | ||||
|
| When the GS FF command is executed printing | |||
|
| is performed in the reverse direction. | |||
| Print width: | 54 mm, | |||
| Characters per line: | Normal paper: | 32 (Font A) | ||
|
| 42 (Font B) |
|
|
|
|
| Label paper: | 30 (Font A) | ||
|
| 40 (Font B) |
|
|
|
| Character spacing: | 0.28 mm (Font A) |
|
|
|
|
| 0.28 mm (Font B) |
|
|
|
|
| Programmable by control command. | |||
| Printing speed: | Approx. 12 lines/second (1/6 inch feed) (* 1) | |||
|
| Approx. 18 lines/second (1/9 inch feed) (* 1) | |||
|
| Approx. 2.0 inches/second (* 1) | |||
|
| Printing speed may slow down depending on the | |||
|
| data transmission speed and combination of con- | |||
|
| trol commands. |
|
|
|
| Paper feeding speed: | Approx. 2.0 inches/second (* 1) | |||
|
| (Approx. 50.0 mm/second) | |||
| Line spacing: | 1/6 inch (4.23 mm) default | |||
|
| Programmable by control command. | |||
|
| (Minimum 1/360 inch) | |||
(* 1): These speed values indicate approximate printing and paper feeding speeds between the beginning and ending of a given label.
2.Characters specifications
Character sets: | Alphanumeric: | 95 |
| Enlarged graphics: | 128 X 2 pages |
| International: | 32 |
61
