Seiko Group TM-L60 manual ESC p m n1 n2, ESC c 5 n, ESC d n

•In the TM-L60, only the journal near-end detector can be se- lected and only the lowest bit of n is valid.

[Notes] • When a paper-end is detected by the journal detector, the printer goes OFF-LINE after printing stops.

•If a paper-end is detected by paper detectors when thermal label paper is selected, the printer goes OFF-LINE after printing data for one label.

[Default] n = 0

ESC c 5 n

[Name]	Enable/disable panel switches
[Format]	<1B>H<63>H<35>H<n>

[Range]

[Description]	Enables or disables the paper-feed switch.
	•	Only the lowest bit of n is valid.
		When n = <* * * * * * * 0>B, the paper feed switch is enabled.
		When n = < * * * * * * * 1>B, the paper feed switch is disabled.
[Notes]	• If the panel switches are disabled by this command, the paper
		feed switch is disabled. Therefore, paper cannot be fed with the
		paper feed switch.
[Default]	n	= 0

ESC d n

[Name]	Print and feed paper n lines
[Format]	<1B>H<64>H<n>

[Range]

[Description]	Prints the data in the print buffer and performs n lines feeds.
	•	Sets the print starting position to the beginning of the line.
	•	The predetermined line spacing remains unchanged.
[Default]	Not defined.
[Reference]	5-3 Miscellaneous Notes

ESC p m n1 n2

[Name]	Generate pulse
[Format]	<1B>H<70>H<m><n1><n2>
[Range]	m = O , 1

39