Seiko Group TM-L60 manual GS H n, With counting down

	• If the counter value set by N5 goes out of the counter operation
	range, it will be forced to convert to the minimum by GS c.
	With counting down
	• If the counting down reaches the value less than the minimum,
	it will be resumed with the maximum.
	• If the counter value set by N5 goes out of the counter operation
	range, it will be forced to convert to the maximum by G3 c.
[Default]	N1 = 1, N2 = 65535, N3 = 1, N5 =1
[Reference]	GS CO, GS Cl, GS C2, GS c

GS H n

[Name]	Select printing position of HRI characters
[Format]	<1D>H<48>H<n>
[Range]	O ≤ n ≤ 3
[Description]	Selects the printing position of HRI characters when printing a bar
	code.
	• n selects the printing position from the following table.
	n		Printing position
	0	Not printed
	1	Above	the	bar	code
	2	Below	the	bar	code
	3	Both above and below the bar code
	• HRI means Human Readable Interpretation.
[Notes]	• HRI characters are printed using the font specified by GS f.
[Default]	n = 0
[Reference]	GS f

GS c

[Name]	Print counter
[Format]	<1D>H<63>H
[Description]	Prints the serial counter.
	• Sets the current counter value in the print buffer as a print data
	(character string) and then counts up or down the counter based
	on the count mode set.

50