Seiko Group TM-L60 manual Choosing a Place for the Printer, Removing the Protective Material

1-2 Choosing a Place for the Printer

nAvoid locations that are subject to direct sunlight or excessive heat (near heaters).

nAvoid using or storing the printer in places subject to excessive temperatures or moisture.

nDo not use or store the printer in a dusty or dirty location.

nWhen setting up the printer, choose a stable, horizontal location.

Intense vibration or shock may damage the printer.

nEnsure the printer has enough space to be used easily.

1-3 Removing the Protective Material

An orange plastic spacer is put into the printing mechanism section to protect the printer from damage during transportation. Before you turn on the printer, be sure to remove the spacer according to the following steps.

1.Open the printer cover.

2.Raise the head-open lever to remove the spacer.

3.Store it in the hollow space. Reinsert the spacer when transporting.

4.Lower the head-open lever.

Protective Material

Head-open Lever

3