Seiko Group TM-L60 manual Introduction

INTRODUCTION

The TM-L60 is a available as a simplificative bar code printer for the following uses:

•One-station printer for ECR and POS use

•Output device for scaling or measuring

•Ticket issuing device

•Small scale instore-marking

The TM-L60 has the following features:

•Either label paper or thermal paper is selectable.

•A light, ultra-compact printer.

• High speed printing: 12 lines/second (12 X 24 font).

•Low noise thermal printing.

•High reliability due to a stable mechanism.

•Easy maintenance, such as head cleaning.

•The command protocol is based on ESC/POW™, a widely used standard.

•The interface cable, drawer control cable, and power cable can be routed in any of four directions: both sides, underneath, and out the back of the case.

•The power switch is on a panel in front of the printer body, providing easy operation, so both side and the back are still available.

•Barcode (UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), CODE39, ITF, CODABAR) printing is possible using a bar code command.

•Characters can be rotated 90°.

•Repeated operation and copy printing are possible by macro definition.

•2 drawer controls are possible using the drawer kick-out interface.

•Since label paper can be ejected by label eject command, it is not necessary to feed more paper than required.

•Easy label insertion.

•Serial number is possible on label papers.

Please be sure to read the instructions in this manual carefully before using your new Epson printer.