Configuring the SDC 8200 system
01ENG
02ARA
00 | 00 | 00 | 00 |
FLO | FLO | FLO | FLO |
Interpretation
2Initialise Units
Initialise Units
1 Load Defaults
Displaying the booth and desk number of an interpreter console
To display the booth and desk number of an interpreter console: Press the MUTE key
While keeping the MUTE key pressed, press the “MENU ” or
“MENU ” menu selection key .
The booth and desk number of this interpreter console appear on the display.
Press Mic to confirm
BOOTH | DESK |
02 | 02 |
Adding interpreter consoles to an existing configuration
To add individual interpreter consoles to an already existing configuration:
From the central unit’s operating menu, choose “Interpretation”, “Initialise Units” and “Add Unit” one after the other”.
The red signal light rings on all interpreter consoles which have not yet been assigned a booth and desk number start flashing and the inter- preter consoles’ displays show “01” for both the booth and the desk number.
On all interpreter consoles not yet initialized, manually assign the booth number (see “Manually assigning an interpreter console an indi- vidual booth number” on page 100) and the desk number (see “Man- ually assigning an interpreter console an individual desk number (interpreter console number)” on page 101)
If all booth and desk numbers are assigned correctly, press the ENTER key on the central unit to save this configuration.
The displays of the interpreter consoles show the languages assigned to the
The interpreter consoles are now ready for operation.
Loading the
If necessary, you can load the
Note!
Loading the
To load the
From the central unit’s operating menu, choose “Interpretation”,
“Initialise Units” and “Load Defaults” one after the other.
The text “Configuration will be overwritten. Continue?” is
shown on the display.
Press the ENTER key to replace your current configuration by the fac-
