Configuring the SDC 8200 system

System

4Ambient Sound

Ambient Sound

1Status

Status

Status = ON

Press ENTER to Save

Ambient Sound

2Loudspeaker

Loudspeaker

Switch Off = No Press ENTER to Save

Ambient Sound

3Aux Out

Aux Out

Switch Off = Yes Press ENTER to Save

Ambient Sound

4Aux In

Aux In

Switch Off = No Press ENTER to Save

Configuring an “ambient sound” console

Optionally, you can use an “ambient sound” console with your SDC 8200 conference and interpretation system. As soon as all other consoles in the conference room are deactivated, the “ambient sound” console automati- cally turns on in order to reproduce the ambient noise within the confer- ence room. The “ambient sound” console enables the interpreters, who often cannot look into the conference room, to hear what is going on in the conference room, so that they are prepared if a speaker takes the floor again.

Note!

You require a special “ambient sound” console and a separate micro- phone! For details on how to connect these components to the central unit, please refer to the operating manual of the “ambient sound” con- sole.

To turn a connected “ambient sound” console on:

￿From the central unit’s operating menu, choose “System”, “Ambient Sound” and “Status” one after the other.

￿Choose “Status = ON” and press the ENTER key to turn the “ambient sound” console on.

To turn the built-in loudspeaker of the “ambient sound” console on or off:

￿From the central unit’s operating menu, choose “System”, “Ambient Sound” and “Loudspeaker” one after the other.

￿To turn the loudspeaker on, choose “Switch Off = No“; to turn the loudspeaker off, choose “Switch Off = Yes”.

￿Press the ENTER key to save your setting.

To turn the AUX output signal of the “ambient sound” console on or off:

￿From the central unit’s operating menu, choose “System”, “Ambient Sound” and “Aux Out” one after the other.

￿To turn the AUX output signal on, choose “Switch Off = No“; to turn the AUX output signal off, choose “Switch Off = Yes”.

￿Press the ENTER key to save your setting.

To turn the AUX input signal of the “ambient sound” console on or off:

￿From the central unit’s operating menu, choose “System”, “Ambient Sound” and “Aux In” one after the other.

￿To turn the AUX input signal on, choose “Switch Off = No“; to turn the AUX input signal off, choose “Switch Off = Yes”.

￿Press the ENTER key to save your setting.

111

Page 111
Image 111
Sennheiser SDC 8200 system manual 111, Configuring an ambient sound console