Sennheiser SDC 8200 system manual Selecting an interpretation channel, Voting, Vote 1

Operating the components of the SDC 8200 system

22

Mic	N.:	1024
	VOTE 1 OF 5
1	2	3	4	5

To adjust the volume of the headphones connected to your conference console:

￿Connect Sennheiser mono headphones to the 3.5 mm mono jack socket

( and/or ).

￿ First, use the headphone volume control ( and/or ) to reduce the headphone volume to the minimum.

￿Put on the headphones and slowly set the volume to a medium level.

Selecting an interpretation channel

If your console is equipped with channel selection keys (SDC 8200 DC, SDC 8200 CC, SDC 8200 DV and SDC 8200 CV), you can choose between the floor channel and the offered interpretation channels.

To select an interpretation channel:

￿Connect Sennheiser mono headphones to your conference console.

￿ Press the “ ￿” or “ ￿” channel selection key .

The selected interpretation channel is output via your headphones.

Voting

You can participate in voting sessions which have to be started by the chairman.

There are two voting modes (“Vote 1 of 3” and “Vote 1 of 5”) which offer different voting options.

Vote 1 of 3

In “Vote 1 of 3” mode, you can vote “Yes” (+) or “No” (-) or abstain (0):

￿To cast your vote, press the corresponding key . +: Yes

-: No

0: Abstention

Your vote is counted. If voting is not secret, the corresponding voting LED lights up.

33