
Configuring the SDC 8200 system
>Volume = |
|
|
| ||
P1 | P2 | P3 | P4 | P5 | P6 |
Setting the volume of the consoles’ built-in loudspeak- ers
The bars on the start display indicate the current volume setting for the consoles’
To set the volume of the consoles’
Turn the jog wheel on the central unit.
If you turn the jog wheel clockwise, the volume of the consoles’
Initialise Units
2Automatic Init
Automatic Init
Please wait
Automatic Init
Press ENTER to Save Initialisation
Initialise Units
1Manual Init
Full Init
Press ENTER to Save
Configuring the conference system
Automatically initializing all conference consoles
The automatic initialization allows you to initialize all conference consoles at once. In this case, however, the consoles are assigned microphone num- bers in an arbitrary order.
From the central unit’s operating menu, choose “Conference”,
“Initialise Units” and “Automatic Init” one after the other.
The text “Please wait” is shown on the display.
When the text “Press ENTER to Save Initialisation” is shown on
the display, press the ENTER key.
All connected conference consoles are initialized automatically and any previous configuration is deleted.
Manually initializing all conference consoles
If it is important that the conference consoles are assigned microphone numbers in a certain order, we recommend choosing the manual initializa- tion.
From the central unit’s operating menu, choose “Conference”,
“Initialise Units” and “Manual Init” one after the other.
The red signal light rings and the “Microphone active” LEDs on all conference consoles start flashing.
Note!
Only the signal light rings of the conference consoles start flashing while the signal light rings of the interpreter consoles remain dark! Ini- tialization of the interpreter consoles is via the “Interpretation” menu.
Choose “Full Init”.
One after the other, press the microphone key of all conference consoles in the order in which they are to be initialized.
85