Sennheiser SDC 8200 system manual Working with the central unit’s operating menu

Operating the components of the SDC 8200 system

>Volume =

P1 P2 P3 P4 P5 P6

Working with the central unit’s operating menu

To choose a menu item from the central unit’s operating menu:

￿Make sure that the central unit is turned on and that all conference/ interpreter consoles are connected.

The start display appears, showing the current volume setting for the consoles’ built-in loudspeakers (see “Setting the volume of the con- soles’ built-in loudspeakers” on page 85) and to which of the central unit’s ports P1 to P6 a cable string is connected (see “Making a system diagnosis” on page 109).

￿ Press the ENTER key .

You get to the first main menu “Conference”.

￿ Turn the jog wheel	until the desired main menu is shown on the dis-
play and press the ENTER key .
You enter the desired main menu.
￿ Turn the jog wheel	until the desired submenu is shown on the dis-

play and press the ENTER key .

You enter the desired submenu where you can choose between addi- tional submenu items by using the jog wheel or choose a setting (in this case, the current value and the text “Press ENTER to Save” are shown on the display).

￿To change the current value:

Turn the jog wheel until the desired value is shown on the display and press the ENTER key .

The new value is saved and you return to the previous menu level.

￿To keep the current value unchanged:

Press the EXIT key .

The current value remains unchanged and you return to the previous menu level.

￿ To exit the central unit’s operating menu, press the EXIT key repeat- edly until the start display appears.

Via the central unit’s operating menu, you can

yselect one out of ten possible conference modes (see “Selecting a confer- ence mode” on page 88)

Note!

The selection of some of the conference modes only makes sense if your conference and interpretation system is PC controlled

yadjust the volume, treble, middle and bass response of the consoles’ built-in loudspeakers (see “Adjusting the audio settings for the con- soles’ built-in loudspeakers” on page 88)

yconfigure the options for the conference (see “Configuring the confer- ence system” on page 85) and interpretation system (see “Configuring the interpretation system” on page 93)

yinitialize the conference consoles (see “Automatically initializing all con- ference consoles” on page 85 or see “Manually initializing all conference consoles” on page 85) and the interpreter consoles (see “Half-automat- ically initializing all interpreter consoles on the central unit” on page 99 or see “Manually assigning an interpreter console an individual booth number” on page 100)

yspecifiy the indication of the voting options on the displays

42