Operating the components of the SDC 8200 system
Note!
You cannot “apply” for a comment by pressing the microphone
key 
.
Signal your intention to take the floor e.g. by raising your hand or giv- ing another sign.
The conference manager can either assign you the “speaking right” by turning on your microphone or ignore your request to speak.
When the conference manager turns on you microphone, the red signal light ring and the “Microphone active” LED on your console light up permanently. When the conference manager withdraws the “speak-
ing right” from you, the red signal light ring | and the “Microphone |
active” LED on your console go off. |
|
9.In “With request” mode:
In this mode, the SDC 8200 system can be controlled either by the chair- man or via the PC. You can cancel your request to speak.
The chairman can use the NEXT key 
(SDC 8200 C and SDC 8200 CC) or the menu selection keys 
(SDC 8200 CV) for assigning the “speaking right” in the order of application.
If the SDC 8200 system is PC controlled, the “speaking right” can be assigned independently of the order of application.
Press the microphone key 
to “apply” for a comment.
The green “Request to speak” LED on your console starts flashing.
The chairman or the conference manager can either assign you the “speaking right” by turning on your microphone or ignore your request to speak.
When the chairman or the conference manager turns on your micro- phone, the red signal light ring and the “Microphone active” LED on your console light up permanently and the green “Request to speak” LED goes off. When the chairman or the conference manager withdraws the “speaking right” from you, the red signal light ring and the “Microphone active” LED on your console go off.
Note!
You can cancel your request to speak by pressing the microphone key once more.
10.In “With Req. No clear” mode:
In this mode, the SDC 8200 system can be controlled either by the chair- man or via the PC. You cannot cancel your request to speak.
The chairman can use the NEXT key 
(SDC 8200 C and SDC 8200 CC) or the menu selection keys 
(SDC 8200 CV) for assigning the “speaking right” in the order of application.
If the SDC 8200 system is PC controlled, the “speaking right” can be assigned independently of the order of application.
Press the microphone key 
to “apply” for a comment.
The green “Request to speak” LED on your console starts flashing.
The chairman or the conference manager can either assign you the “speaking right” by turning on your microphone or ignore your request to speak.
31
