Configuring the SDC 8200 system
Booth Configuration
1Language
Booth Configuration
2
Configuring the main target language (A-channel) of a booth
To configure the main target language of a booth:
From the central unit’s operating menu, choose “Interpretation”, “Configuration” and “Select Booth” one after the other.
The current booth number is shown on the display.
Choose the number of the booth whose main target language
Choose “Language” and press the ENTER key.
The current main target language is shown on the display.
Choose the desired main target language and press the ENTER key to save your setting.
The configuration of the main target language of a booth cannot be changed on the interpreter consoles!
Example:
Let us assume that the active languages at a conference are English, German and French. You then have to configure e.g. an “English” booth by choosing “English” as the main target language for this booth.
Configuring the second target language (B-channel) of a booth
An interpreter may work into several target languages. In order that the interpreter is able to interpret into a second language, the
Note!
The second target language must already be configured as the main target language of another booth!
The
From the central unit’s operating menu, choose “Interpretation”, “Configuration” and “Select booth” one after the other.
The current booth number is shown on the display.
Choose the number of the booth whose second target language (B- channel) you want to configure and press the ENTER key.
Choose
Choose the number of the booth whose main target language corre- sponds to the language you want to configure for the
Example:
Let us assume that there are three interpreter booth:
–Booth 1 for the target language English
–Booth 2 for the target language French
–Booth 3 for the target language German
In order to set the
98
