118, Aux Out | Sennheiser SDC 8200 specs

Specifications

Central units

			SDC 8200 CU/SDC 8200 CU-M

		Input level	max. +3 dBu
	AUX IN 1,2
	AUX IN 1,2	Input impedance	> 6 kΩ at 1 kHz
	XLR-3F, transformer balanced	Input impedance	> 6 kΩ at 1 kHz
	XLR-3F, transformer balanced
		Frequency response	100–14,000 Hz

		Output level	max. +8 dBu

		Output impedance	≤ 340 Ω at 1 kHz

	AUX OUT 1	Signal-to-noise ratio	max. 78 dBA
	AUX OUT 1
	XLR-3M, transformer balanced	Frequency response	100–14,000 Hz
		Frequency response	100–14,000 Hz

		THD+N	≤ 0.05 % (1,5 dBu)

		SINAD	> 30 dB

		Output level	max. +0 dBu

		Output impedance	< 100 Ω at 1 kHz
	AUX OUT 2, 3, 4, 5, 6
	AUX OUT 2, 3, 4, 5, 6	Signal-to-noise ratio	max. 83 dBA
	15-pole sub-D, unbalanced	Signal-to-noise ratio	max. 83 dBA
	15-pole sub-D, unbalanced
		Frequency response	100–14,000 Hz

		THD+N	≤ 0.5 % (1.5 dBu)

		Output power	max. 90 mW at 32 Ω

	Headphone output	Signal-to-noise ratio	max. 75 dBA

		Frequency response	100–14,000 Hz
		Frequency response	100–14,000 Hz

		THD+N	≤ 0.2 % (0 dBu)

	PC interface COM 1		RS 232 SUB-D-9, for interpreter software

	PC interface COM 2		RS 232 SUB-D-9, for camera and serial control

	PC interface COM 3		RS 232 SUB-D-9, for conference software

	Test tone		400 Hz and 1 kHz

	Mains voltage		100–240 V (50–60 Hz)

	Mains current		max. 3.5 A / 230 V; 7.0 A / 115 V

	Power consumption		approx. 500 VA

	Fuse		3,15 A / 230 V; 7,0 A / 115 V

	Output voltage ports 1–6		approx. 48 V

	Operating temperature		0 to +40 °C

	Sound pressure level of fan		48 dB(A) SPL at 1 m

	Dimensions		approx. 485 x 141 x 265 mm

	Weight		approx. 6 kg

118

Image 118

Sennheiser SDC 8200 system manual 118, Aux Out

Contents

SDC Thank you for choosing Sennheiser Contents Interconnecting several central units in master/slave mode 100 Important safety instructions Overload Important safety informationDisconnection from the mains Objects and liquids Replacement parts Maintenance and careSafety check SDC 8200 the digital conference and interpretation system Overview of the components SDC 8200 system Conference consoles Central units Interpreter consolesSDC 8200 CU central unit SDC 8200 CU-M central unit System cablesSoftware control SDC 8200 AO analog output unit Display of voting results as diagrams Technology used Components of the SDC 8200 system in detail All consoles featureConsoles Interpreter console features SDC 8200 D conference unit SDC 8200 C chairman unit SDC 8200 DC conference unit SDC 8200 CC chairman unit SDC 8200 DV conference unit Vote LED SDC 8200 CV chairman unit SDC 8200 ID interpreter console Autofloor LED SDC 8200 CU central unit SDC 8200 CU-M central unit SDC 8200 AO analog output unit optional System cables Turning the conference and interpretation system on/off Operating the components of the SDC 8200 systemTurning on the central unit for the first time Turning interconnected SDC 8200 CU central units on/off Operating the delegate unitsTaking the floor / Making a request to speak Direct Access mode Group 3 mode With request mode With Req. No clear mode Turning off the microphone / Cancelling a request to speak Hearing damage due to high volumes Voting Selecting an interpretation channelVote 1 Using the chip card slot of a conference console Operating the VIP units Turning all active conference consoles off priority Operating the chairman unitStarting a voting session Assigning a participant the speaking right Operating the interpreter consoles This system is capable of producing sound pressure Configuring the B-channel of an interpreter console Using the interpreter console Switching between the A-channel and the B-channel Muting the microphone of the interpreter console Adjusting the volume of the consoles’ built-in loudspeakersOperating the central unit Restarting the conference and interpretation system Menu operating controls F1, F2 and F3 function keysOperating Menu Control Level Working with the central unit’s operating menu Operating the components of the SDC 8200 system Interconnecting up to twelve SDC 8200 CU central units Interconnecting the conference/interpreter consolesConnecting cable strings to a central unit Structuring the SDC 8200 system Expansion stage 1 one central unit with up to 20 consoles =10 m RS 232 = 10 m Structuring an interpretation system Determining maximum cable lengthsCalculating the voltage drop on the system cables Mode between booths Override Selectable modes between or within interpreter boothsMode between booths Mixed Mode between booths Toggle Override Auto-floor function Mode in booths MixedMode in booths Toggle Override Example AUTO-FLOOR Connecting external audio sources Using external equipmentUsing the audio outputs of the central unit Conference and interpreter consoles Setting up the SDC 8200 systemPreparing the SDC 8200 system components for set up Central unit Setting up the SDC 8200 system Interconnecting the consoles Interconnecting the SDC 8200 system componentsConnecting a cable string to the central unit Activating the master/slave mode Exiting the slave mode of a central unit Connecting additional equipment Setting up remote conferences Connecting PA systems, recording units, etc Pin assignment of the 15-pole sub-D socket AUX OUT Load Connecting a PC to the central unit Start display Configuring the SDC 8200 systemIntroduction to the central unit’s operating menu Six main menus Exit Enter Submenus Menu part 1 Conference menu part 2 Submenus Menu part 3 Submenus of the Conference menu part 4 Submenus of the Conference Manual Init Submenus of the Conference menu part 6 Submenus of the Conference menu part Menu InterpretationPart 1of Submenus of the Interpretation menu part 2 Submenus of the Interpretation menu part 3 Submenus of the Interpretation menu part 4 Interpretation menu part Submenus of the Aux-In/Out menu part 1 Submenus of the Aux-In/Out menu part 2 Submenus of the Aux-In/Out menu part 3 Submenus of the Aux-In/Out menu part 4 Submenus of the Aux-In/Out menu part 5 Aux-In/Out Menu part 6 Submenus of the Aux-In/Out menu part 7 Submenus of the Aux-In/Out menu part 8 Submenus of the System menu Part 1 Submenus of the System menu part 2 Language and the License menu part 1 Automatically initializing all conference consoles Setting the volume of the consoles’ built-in loudspeak- ersConfiguring the conference system Manually initializing all conference consoles Text Mic. Number = 00 is shown on the display Reserving a microphone number Selecting a conference mode Setting the speaker limit Adjusting the audio settings for the consoles’ microphones Configuring additional chairman units Chairmen Deleting the list of chairman units Chairmen Resetting the conference system Reset Configuring additional VIP units VIPDeleting the list of VIP units VIP Testing the consoles’ built-in loudspeakers Testing the consoles’ microphones Configuring the display of the voting options Configuring the interpretation systemWorking with the interpreter configuration Creating a new interpreter configuration Modifying the currently active interpreter configuration Loading a previously saved interpreter configuration Configuring the operating mode between booths Setting the max. number of interpreter booths/languagesSetting the max. number of interpreter consoles per booth Options Configuring the operating mode within a booth Configuring the language options for the interpreter booths Configuring the main target language A-channel of a booth Configuring the second target language B-channel of a booth Enabling the auto-relay interpretation function Auto-floor 100 101 Adding interpreter consoles to an existing configuration 102 103 Resetting the interpretation systemChoosing the audio inputs and outputs Adjusting the volume of the audio outputs 104 105 Assigning a channel to an audio output 106 Turning on/off the audio inputs or outputs Adjusting the input sensitivity of an audio input Configuring the audio outputs for remote conferencingAdjusting the input level of an audio input 107 108 109 Making a system diagnosisDisplaying the current port status Checking the communication within a cable string Configuring connected additional components110 Turning on/off a camera control Configuring an ambient sound console 111 Choosing the language of the central unit’s operating menu Software, language and license112 Displaying the central unit’s serial number 113 Central unit does not work If problems occur114 Console does not work Accessories 115 Features of the central units Specifications116 117 118 AUX OUT RJ 45 cable SDC 8200 AO analog output unit119 Appendix a Camera control protocol Syntax of the commands120 121 CommandsNotation of the general syntax Appendix B Control panel protocol 122 123 1X06060606 Appendix C Repeater for the SDC 8200 system 124 CE Declaration of Conformity Warranty regulationsManufacturer declarations FCC Rules 126