Important safety information, Overload | Sennheiser SDC 8200

Important safety information

Important safety information

Warning!

To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. Do not open the unit as there are potentially dangerous voltages present inside. Refer all servicing to qualified service personnel.

Caution!

Use only accessories recommended by the manufacturer to avoid fire, elec- tric shock, or other hazards. To prevent the risk of electric shock, do not remove cover or back. No user serviceable parts inside! Refer all servicing to qualified service personnel.

The label shown on the left is attached to the back of the unit. The symbols on this label have the following meaning:

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the unit’s enclosure that may be of sufficient magnitude to constitute risk of fire or electric shock.

This symbol is intended to alert the user to the risk of electric shock if the unit is opened. There are no serviceable parts inside. Refer servicing to qualified personnel only.

This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this unit.

Warning! Power source

The central unit is a Class 1 unit. It must only be connected to properly grounded power outlets.

This unit should be operated only from the type of power source indicated on the marking label. lf you are not sure of the type of power supply to your building, consult your dealer or local power company.

Disconnection from the mains

To disconnect the unit from the mains, pull the mains plug out of the wall outlet.

Overload

Do not overload wall outlets and extension cables as this may result in fire and electric shock.

Objects and liquids

Never push objects of any kind through openings of this unit as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquids of any kind onto the unit. Should a spill- age occur, unplug the unit and have it checked by a technician.

7

Image 7

Sennheiser SDC 8200 system manual Important safety information, Disconnection from the mains, Overload, Objects and liquids

Contents

SDC Thank you for choosing Sennheiser Contents Interconnecting several central units in master/slave mode 100 Important safety instructions Objects and liquids Important safety informationDisconnection from the mains Overload Replacement parts Maintenance and careSafety check SDC 8200 the digital conference and interpretation system Conference consoles Overview of the components SDC 8200 system Central units Interpreter consolesSDC 8200 CU central unit SDC 8200 AO analog output unit System cablesSoftware control SDC 8200 CU-M central unit Technology used Display of voting results as diagrams Components of the SDC 8200 system in detail All consoles featureConsoles Interpreter console features SDC 8200 D conference unit SDC 8200 C chairman unit SDC 8200 DC conference unit SDC 8200 CC chairman unit Vote LED SDC 8200 DV conference unit SDC 8200 CV chairman unit Autofloor LED SDC 8200 ID interpreter console SDC 8200 CU central unit SDC 8200 CU-M central unit SDC 8200 AO analog output unit optional System cables Turning the conference and interpretation system on/off Operating the components of the SDC 8200 systemTurning on the central unit for the first time Turning interconnected SDC 8200 CU central units on/off Operating the delegate unitsTaking the floor / Making a request to speak Direct Access mode Group 3 mode With Req. No clear mode With request mode Hearing damage due to high volumes Turning off the microphone / Cancelling a request to speak Voting Selecting an interpretation channelVote 1 Operating the VIP units Using the chip card slot of a conference console Turning all active conference consoles off priority Operating the chairman unitStarting a voting session Assigning a participant the speaking right This system is capable of producing sound pressure Operating the interpreter consoles Configuring the B-channel of an interpreter console Switching between the A-channel and the B-channel Using the interpreter console Restarting the conference and interpretation system Adjusting the volume of the consoles’ built-in loudspeakersOperating the central unit Muting the microphone of the interpreter console Menu operating controls F1, F2 and F3 function keysOperating Menu Control Level Working with the central unit’s operating menu Operating the components of the SDC 8200 system Structuring the SDC 8200 system Interconnecting the conference/interpreter consolesConnecting cable strings to a central unit Interconnecting up to twelve SDC 8200 CU central units Expansion stage 1 one central unit with up to 20 consoles =10 m RS 232 = 10 m Structuring an interpretation system Determining maximum cable lengthsCalculating the voltage drop on the system cables Mode between booths Toggle Override Selectable modes between or within interpreter boothsMode between booths Mixed Mode between booths Override Example Mode in booths MixedMode in booths Toggle Override Auto-floor function AUTO-FLOOR Connecting external audio sources Using external equipmentUsing the audio outputs of the central unit Central unit Setting up the SDC 8200 systemPreparing the SDC 8200 system components for set up Conference and interpreter consoles Setting up the SDC 8200 system Interconnecting the consoles Interconnecting the SDC 8200 system componentsConnecting a cable string to the central unit Exiting the slave mode of a central unit Activating the master/slave mode Setting up remote conferences Connecting additional equipment Pin assignment of the 15-pole sub-D socket AUX OUT Connecting PA systems, recording units, etc Load Connecting a PC to the central unit Six main menus Configuring the SDC 8200 systemIntroduction to the central unit’s operating menu Start display Exit Enter Menu part 1 Submenus Submenus Conference menu part 2 Menu part 3 Submenus of the Conference menu part 4 Manual Init Submenus of the Conference Submenus of the Conference menu part 6 Submenus of the Conference menu part Menu InterpretationPart 1of Submenus of the Interpretation menu part 2 Submenus of the Interpretation menu part 3 Submenus of the Interpretation menu part 4 Interpretation menu part Submenus of the Aux-In/Out menu part 1 Submenus of the Aux-In/Out menu part 2 Submenus of the Aux-In/Out menu part 3 Submenus of the Aux-In/Out menu part 4 Submenus of the Aux-In/Out menu part 5 Menu part 6 Aux-In/Out Submenus of the Aux-In/Out menu part 7 Submenus of the Aux-In/Out menu part 8 Part 1 Submenus of the System menu Submenus of the System menu part 2 Language and the License menu part 1 Manually initializing all conference consoles Setting the volume of the consoles’ built-in loudspeak- ersConfiguring the conference system Automatically initializing all conference consoles Text Mic. Number = 00 is shown on the display Reserving a microphone number Setting the speaker limit Selecting a conference mode Adjusting the audio settings for the consoles’ microphones Deleting the list of chairman units Chairmen Configuring additional chairman units Chairmen Resetting the conference system Reset Configuring additional VIP units VIPDeleting the list of VIP units VIP Testing the consoles’ microphones Testing the consoles’ built-in loudspeakers Configuring the display of the voting options Configuring the interpretation systemWorking with the interpreter configuration Creating a new interpreter configuration Loading a previously saved interpreter configuration Modifying the currently active interpreter configuration Options Setting the max. number of interpreter booths/languagesSetting the max. number of interpreter consoles per booth Configuring the operating mode between booths Configuring the language options for the interpreter booths Configuring the operating mode within a booth Configuring the second target language B-channel of a booth Configuring the main target language A-channel of a booth Enabling the auto-relay interpretation function Auto-floor 100 101 102 Adding interpreter consoles to an existing configuration 103 Resetting the interpretation systemChoosing the audio inputs and outputs 104 Adjusting the volume of the audio outputs Assigning a channel to an audio output 105 Turning on/off the audio inputs or outputs 106 107 Configuring the audio outputs for remote conferencingAdjusting the input level of an audio input Adjusting the input sensitivity of an audio input 108 109 Making a system diagnosisDisplaying the current port status Turning on/off a camera control Configuring connected additional components110 Checking the communication within a cable string 111 Configuring an ambient sound console Displaying the central unit’s serial number Software, language and license112 Choosing the language of the central unit’s operating menu 113 Console does not work If problems occur114 Central unit does not work 115 Accessories Features of the central units Specifications116 117 AUX OUT 118 RJ 45 cable SDC 8200 AO analog output unit119 Appendix a Camera control protocol Syntax of the commands120 121 CommandsNotation of the general syntax 122 Appendix B Control panel protocol 1X06060606 123 124 Appendix C Repeater for the SDC 8200 system FCC Rules Warranty regulationsManufacturer declarations CE Declaration of Conformity 126