Configuring the SDC 8200 system

Options

1Test Tone

Options

2Test Units

Options

3 Light Ring

Testing the consoles’ built-in loudspeakers

Via the “Test Tone” menu item, you can check if the consoles are con- nected correctly and if the consoles’ built-in loudspeakers are working cor- rectly.

To activate the test tone:

￿From the central unit’s operating menu, choose “Conference”, “Options” and “Test Tone” one after the other.

￿Choose “Status = ON”.

All loudspeakers produce the test tone.

￿To change the volume of the test tone, choose “Level”. You can choose between “High” and “Low”.

￿To change the volume of the test tone, choose “Frequency”. You can choose between “High” and “Low”.

￿To deactivate the test tone, choose “Status = OFF” and press the ENTER key.

The test tone is deactivated.

Testing the consoles’ microphones

Via the “Test Units” menu item, you can check if the consoles’ micro- phones are working correctly

To activate the microphones:

￿From the central unit’s operating menu, choose “Conference”, “Options” and “Test Units” one after the other.

￿Choose “Status = ON”.

￿All microphones are activated one after the other in the order in which the consoles were initialized. The red signal light ring of the currently active microphone lights up. After all microphones have been activated once, activation re-starts with the first microphone.

Activating/deactivating the flashing of the signal light ring

If – in “With Request” or “With Req. No Clear” mode – a participant presses

the microphone key on his console, he makes a request to speak and

the green “Request to speak” LED

starts flashing.

To activate the flashing of the signal light ring on all consoles:

￿From the central unit’s operating menu, choose “Conference”, “Options” and “Light Ring” one after the other.

￿Choose “Blink in Request” and press the ENTER key.

If a particpant makes a request to speak, the red signal light ring and

the green “Request to speak” LED

on his console start flashing.

To deactivate the flashing of the signal light ring on all consoles:

￿Choose “OFF”.

If a particpant makes a request to speak, only the green “Request to

speak” LED on his console starts flashing.

92

Page 92
Image 92
Sennheiser SDC 8200 system manual Testing the consoles’ built-in loudspeakers, Testing the consoles’ microphones