HP CM1410, CE862A Connect to a network, Supported network protocols, Configure the IP address

Models: CM1410 CE862A

1 308
Download 308 pages 59.45 Kb
Page 70
Image 70

Connect to a network

Supported network protocols

To connect a networking-equipped product to a network, you need a network that uses one or more of the following protocols.

TCP/IP (IPv4 or IPv6)

Port 9100

LPR

DHCP

AutoIP

SNMP

Bonjour

SLP

WSD

NBNS

LLMNR

Install the product on a wired network

Configure the IP address

1.Connect the network cable to the product and to the network.

2.Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product.

3.At the product control panel, press the Setup button.

54 Chapter 5 Connect the product

ENWW

Page 70
Image 70
HP CM1410, CE862A manual Connect to a network, Supported network protocols, Install the product on a wired network