HP CE862A, CM1410 manual No dial tone, No fax answer

Control panel message	Description	Recommended action
No dial tone.	The product could not detect a dial tone.	Check for a dial tone on the phone line by
		touching the Start Fax button.
		Unplug the telephone cord from both the
		product and the wall and replug the cord.
		Make sure that you are using the telephone
		cord that came with the product.
		Unplug the product telephone cord from the
		wall, plug in a telephone, and try making a
		voice call.
		Make sure that the phone cord from the wall
		telephone jack is plugged into the line
		port.
		Plug the product phone cord into a jack for
		another phone line.
		Check the phone line by using the Run Fax
		Test option from the Service menu on the
		control panel.
		If the error persists, contact HP. See
		www.hp.com/support/CM1410series or the
		support flyer that came in the product box.
No fax answer.	Attempts to redial a fax number failed, or the	Call the recipient to ensure that the fax
Canceled send.	Redial if No Answer option was turned off.	machine is on and ready.
		Check that you are dialing the correct fax
		number.
		Check that the redial option is enabled.
		Unplug the telephone cord from both the
		product and the wall and replug the cord.
		Unplug the product telephone cord from the
		wall, plug in a telephone, and try making a
		voice call.
		Make sure that the phone cord from the wall
		telephone jack is plugged into the line
		port.
		Plug the product phone cord into a jack for
		another phone line.
		If the error persists, contact HP. See
		www.hp.com/support/CM1410series or the
		support flyer that came in the product box.

ENWW Solve fax problems 163