Use HP Web Jetadmin software

HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and troubleshooting network-connected peripherals. Management is proactive, allowing network administrators the ability to resolve issues before users are affected. Download this free, enhanced- management software at www.hp.com/go/webjetadmin.

Device plug-ins can be installed into HP Web Jetadmin to provide support for specific product features. The HP Web Jetadmin software can automatically notify you when new plug-ins are available. On the Product Update page, follow the directions to automatically connect to the HP Web site and install the latest device plug-ins for your product.

NOTE: Browsers must be Java™-enabled. Browsing from a Mac OS is not supported.

Product security features

The product includes a password feature that restricts access to setup features while allowing basic functions to continue. The password can be set from the EWS or the control panel.

Private receive can be used to store faxes on the product until you are at the product to print them.

Assign a system password

Assign a password for the product so that unauthorized users cannot change the product settings.

1.Open the HP Embedded Web Server by entering the product IP address into the address line of a Web browser.

2.Click the Settings tab.

3.On the left side of the window, click the Security menu.

4.In the Device Security Settings area, click the Configure . . . button.

5.In the Device Password area, type the password in the New Password box, and type it again in the Verify password box.

6.Click the Apply button. Make note of the password and store it in a safe place.

ENWW

Use HP Web Jetadmin software 193

Page 209
Image 209
HP CE862A, CM1410 manual Use HP Web Jetadmin software, Product security features, Assign a system password