3.Touch the Advanced Setup menu.

4.Scroll to and touch the Redial if Comm. Error button, and then touch the On button.

Set light/dark and resolution

Set the default light/dark (contrast) setting

The contrast affects the lightness and darkness of an outgoing fax as it is being sent.

The default light/dark setting is the contrast that is normally applied to items that are being faxed. The slider is set to the middle as the default setting.

1.From the Home screen, touch the Setup button.

2.Touch the Fax Setup menu.

3.Touch the Advanced Setup menu.

4.Touch the Lighter/Darker button, and then touch one of the arrows to adjust the slider.

Set resolution settings

NOTE: Increasing the resolution increases the fax size. Larger faxes increase the send time and could exceed the available memory in the product.

Use this procedure to change the default resolution for all fax jobs to one of the following settings:

Standard: This setting provides the lowest quality and the fastest transmission time.

Fine: This setting provides a higher resolution quality than Standard that is usually appropriate for text documents.

Superfine: This setting is best used for documents that mix text and images. The transmission time is slower than the Fine setting but faster than the Photo setting.

Photo: This setting produces the best images, but greatly increases the transmission time.

The factory-set default resolution setting is Fine.

Set the default resolution setting

1.From the Home screen, touch the Setup button.

2.Touch the Fax Setup menu.

3.Touch the Advanced Setup menu.

4.Touch the Fax Resolution button, and then touch one of the options.

Cover-page templates

Several business and personal fax cover-page templates are available in the PC Fax Send software program.

NOTE: You cannot alter cover-sheet templates, but you can edit the fields within the templates.

ENWW

Set fax settings 141

Page 157
Image 157
HP CE862A, CM1410 manual Set light/dark and resolution, Cover-page templates, Set the default light/dark contrast setting