HP CE862A, CM1410 manual Service menu, Run Fax Test

Service menu

In the following table, items that have an asterisk (*) indicate the factory default setting.

Menu item	Sub-menu item	Sub-menu item	Description
Fax Service	Clear Saved Faxes		Clears all faxes in memory.
	Run Fax Test		Performs a fax test to verify that
			the phone cord is plugged in
			the correct outlet and that there
			is a signal on the phone line. A
			fax test report is printed
			indicating the results.
	Print T.30 Trace	Now	Prints or schedules a report
		Never*	that is used to troubleshoot fax
			transmission issues.
		If Error
		At End of Call
	Error Correction	On*	The error correction mode
		Off	allows the sending device to re-
			transmit data if it detects an
			error signal.
	Fax Service Log		The fax service log prints out
			the last 40 entries in the fax log.
Cleaning Page			Cleans the product when
			specks or other marks appear
			on printed output. The cleaning
			process removes dust and
			excess toner from the paper
			path.
			When selected, the product
			prompts you to load plain Letter
			or A4 paper in Tray 1. Touch
			the OK button to begin the
			cleaning process. Wait until the
			process completes. Discard
			the page that prints.
USB Speed	High*		Sets the USB speed for the
	Full		USB connection to the
			computer. For the product to
			actually operate at high speed,
			it must have high speed
			enabled and be connected to
			an EHCI host controller that is
			also operating at high speed.
			This menu item also does not
			reflect the current operating
			speed of the product.

Less Paper Curl	On
	Off*

When printed pages are consistently curled, this option sets the product to a mode that reduces curl.

ENWW Setup Menu 23