HP CM1410, CE862A manual Dial Prefix

Menu item	Sub-menu item	Sub-menu item	Description
	Dial Prefix	On	Specifies a prefix number that must be dialed when sending
		Off*	faxes from the product. If you turn this feature on, the product
			prompts you to enter the number and then it automatically
			includes that number every time you send a fax.
Advanced Setup	Fax Resolution	Standard	Sets the resolution for sent documents. Higher resolution
		Fine*	images have more dots per inch (dpi), so they show more
			detail. Lower resolution images have fewer dots per inch and
		Superfine	show less detail, but the file size is smaller and the fax takes
			less time to transmit.
		Photo
	Lighter/Darker		Sets the darkness of outgoing faxes.
	Fit to Page	On*	Shrinks incoming faxes that are larger than the paper size
		Off	set for the tray.
	Glass Size	Letter	Sets the default paper size for documents being scanned
		A4	from the flatbed scanner.
	Dialing Mode	Tone*	Sets whether the product should use tone or pulse dialing.
		Pulse
	Redial if Busy	On*	Sets whether the product should attempt to redial if the line
		Off	is busy.
	Redial if No Answer	On	Sets whether the product should attempt to redial if the
		Off*	recipient fax number does not answer.
	Redial if Comm.	On*	Sets whether the product should attempt to redial the
	Error	Off	recipient fax number if a communication error occurs.
	Detect Dial Tone	On	Sets whether the product should check for a dial tone before
		Off*	sending a fax.
	Billing Codes	On	Enables the use of billing codes when set to On. A prompt
		Off*	appears where you can enter the billing code for an outgoing
			fax.
	Extension Phone	On*	When this feature is enabled, you can press the 1-2-3
		Off	buttons on the extension phone to cause the product to
			answer an incoming fax call.
	Stamp Faxes	On	Sets the product to print the date, time, sender's phone
		Off*	number, and page number on each page of incoming faxes.

18 Chapter 2 Control panel menus ENWW