Sigma SQC-122c manual Chapter Menus Next Menu Screens

Chapter 3 Menus

3.2Next Menu Screens

The Next Menu SoftKey provides access to two sub-menus of the Main Menu that control display and operating mode preferences.

	THICKNESS(kA)			RATE(A/s)			POWER(%)			THICKNESS(kA)			RATE(A/s)			POWER(%)
Next									Next
	0.000			0.0		0.0				0.000			0.0		0.0
Menu									Menu
	100.0									100.0
Zero									Next
									Graph
	50.0									50.0
Auto /									Switch
Manual									Displays
									Sensor
	0.0								Info	0.0
		0.0	12.5	25.0		37.5		50.0			0.0	12.5	25.0		37.5		50.0
				Power (% vs. Time)									Power (% vs. Time)
				PHASE: Stopped									PHASE: Stopped
	Run #: 1				Source: 1					Run #: 1				Source: 1
Start
	5-16-00				Max Pow:: 100.00 %				Start	5-16-00				Max Pow:: 100.00 %
	8:22:39				Slew: 100.00 %					8:22:39				Slew: 100.00 %

Zero

Auto /

Manual

Next

Graph

Switch

Displays

Sensor Info

Next Menu Screens

Zeros the thickness reading. Useful for resetting or extending the current deposition layer.

Toggles between Auto and Manual power control. When Auto/Manual is shown, output power is set by the SQC-122c to achieve the programmed deposition rate. When Manual/Auto is shown, the control knob sets the output power.

Cycles through options for the main display. Choose between Rate, Rate Deviation, and Power graphs.

Toggles between data display options at the bottom of the SQC-122c screen. Note the differences between the screens above, and the Main Menu screen in the previous section.

Replaces the graph with the sensor information screen:

Next		THICKNESS(kA)		RATE(A/s)	POWER( %)
	0.000			0.0	0.0
Menu
		Sensor #	Enable	Frequency		Life
		1	ON	5.543210 MHz		54.32 %
		2	ON	5.654321 MHz		65.43 %

3-4