About the ID of the Remote

Commander

You can avoid misoperation from other remote commanders by setting the VTR4/ID/VTR2 selector to ID. Use the supplied Remote Commander when you set the selector to ID. When you use the Remote Commander for the first time, register the ID following the procedure below. Once you register the ID, you do not need to do again.

(1) Open the LCD panel.

(2) Press MENU to display the menu on the LCD screen.

(3) Press Vor vto select COMMANDER, then press EXECUTE.

(4) Press vto select ID SET, then press

EXECUTE.

(5) Set the VTR4/ID/VTR2 selector on the Remote Commander to ID.

(6) Point the Remote Commander at the camcorder and press p STOP on the Remote Commander.

After the beep sound, the ID of the Remote Commander is registered, and the COMMANDER is set to ID in the menu system.

(7) Press MENU to erase the menu display.

6 STOP

1

5 VTR 4 ID VTR 2

When the BEEP is set to OFF in the menu system

The beep does not sound at step 6.

Acerca del ID del mando a

distancia

Para evitar que se produzca un funcionamiento

 

incorrecto con el uso de otros mandos a distancia,

 

ajuste el selector VTR4/ID/VTR2 en ID. Utilice el

 

mando a distancia suministrado para realizar el

 

ajuste del selector. Si utiliza el mando a distancia

 

por primera vez, registre el ID según el siguiente

 

procedimiento. Una vez registrado, no es

 

 

 

necesario volver a realizar la operación.

Additional

pantalla LCD.

 

(1)Abra el panel LCD.

 

 

(2)Pulse MENU para que aparezca el menú en la

 

(3)Pulse vo Vpara seleccionar COMMANDER

information/

(5)Ajuste el selector VTR4/ID/VTR2 en el

y, a continuación, pulse EXECUTE.

 

(4)Pulse vpara seleccionar ID SET, pulse

 

EXECUTE.

 

 

mando a distancia en la posición ID.

Información

(6)Oriente el mando a distancia hacia la

 

videocámara y pulse p STOP en dicho

 

mando.

 

 

El pitido indica que el ID del mando a

adicional

en el sistema de menús.

 

distancia se ha registrado y que

 

 

COMMANDER se encuentra ajustado en ID

 

(7)Pulse MENU para eliminar la visualización

 

del menú.

 

 

2

MENU

 

3,

4

EXECUTE

7 MENU

Si BEEP está ajustado en OFF en el sistema de

 

menús

 

El pitido no se escucha en el paso 6.

87

 

DCR-PC7.3-858-174-22 (E,S)

Page 87
Image 87
Sony DCR-PC7 operating instructions About the ID of the Remote Commander, Acerca del ID del mando a Distancia