Menu items in the 600s, relating to the time code generator

Item number

Item name

Settings

 

 

 

 

 

 

 

 

605

TCG REGEN

Select the signal to be regenerated when the time code generator is in the regeneration

 

MODE

mode (i.e., when the PRESET/REGEN switch on the subsidiary control panel is set to

 

 

REGEN, or the unit is in automatic edit mode).

 

 

 

 

 

 

 

: Both the time code and user bits are regenerated.

 

 

TC&UB

 

 

TC: Only the time code is regenerated.

 

 

UB: Only the user bits are regenerated.

 

 

 

 

 

 

 

 

607

U-BIT BINARY

Select the user bits to be used in the time code generated by the time code generator.

 

GROUP FLAG

 

 

 

 

 

 

 

000

: Character set not specified.

 

 

 

 

001: 8-bit characters compliant with ISO 646 and ISO 2022.

 

 

010: Undefined.

 

 

011: Undefined.

 

 

100: Undefined.

 

 

101: SMPTE 262M page/line multiplex system.

 

 

110: Undefined.

 

 

111: Undefined.

 

 

 

 

 

 

 

 

610

REGEN

When editing with two DSR-2000A/2000AP units, if you use the control panel for editing

 

CONTROL MODE

operation, select whether or not the time code is automatically regenerated.

 

 

 

 

 

 

 

 

 

AS&IN

: In editing with this unit as the recorder, regardless of the setting of the INT/

 

 

 

 

 

 

EXT–PRESET/REGEN switch, in assemble and insert editing, the time code

 

 

generator regenerates according to the time code on the tape.

 

 

ASSEM: In editing with this unit as the recorder, regardless of the setting of the INT/

 

 

EXT–PRESET/REGEN switch, in assemble editing only, the time code generator

 

 

regenerates according to the time code on the tape.

 

 

MANU: Regardless of whether this unit is the recorder or player, the time code

 

 

generator operates in accordance with the PRESET/REGEN setting of the INT/EXT–

 

 

PRESET/REGEN switch.

 

 

FULL: Regardless of the REMOTE button setting, when any of the ASSEMBLE,

 

 

VIDEO, CH-1 to CH-4 and TC buttons is lit, the time code generator regenerates

 

 

according to the time code played back from the tape.

 

 

 

 

 

 

 

 

611

TC OUTPUT

Select the time code output mode for output from the TIME CODE OUT connector in E-

 

PHASE IN EE

E mode.

 

MODE

 

 

 

 

 

 

 

MUTE

: Mute the output.

 

 

 

 

THRU: Output the time code input to the TIME CODE IN connector as it is.

 

 

V-IN:Output the time code with the same phase as the input video signal phase.

 

 

V-OUT:Output the time code with the same phase as the output video signal phase.

 

 

 

 

 

 

 

 

612

TC OUTPUT

Select whether to mute the output from the TIME CODE OUT connector in search (jog/

 

MUTE IN

shuttle) mode.

 

SEARCH MODE

 

 

 

 

 

 

 

ON

: Mute.

 

 

 

 

OFF: Do not mute.

613

VITC OUTPUT

Select the time code to be output as VITC.

 

 

OFF: Do not output VITC.

 

 

TC: Output TC after converting it into VITC.

 

 

 

 

 

 

VITC

: Output VITC.

 

 

 

 

 

 

 

 

Menu Setup 6 Chapter

Chapter 6 Setup Menu 117