Location and Function of Parts
There are four control panels as shown in the figure below.
Connector panel (See page 29.)
Upper control panel (See page 14.)
Lower control panel (See page 17.)
Subsidiary control panel (See page 26.)
To adjust the position of the lower control panel
You can fix the lower control panel in any position between vertical and horizontal for ease of operation.
Handle
Overview 1 Chapter
Lock knob
When the panel is at the desired angle, turn both lock knobs to fix in position.
Release lever
If you raise the panel to the horizontal, it automatically locks in position.
To lower the panel, press both release levers.
Raise the panel by holding both ends or both handles.
To fix the panel at an angle where the lock knobs are inaccessible
1First position the panel at the desired angle, then without tightening the lock knobs, press the release levers and raise the panel to the horizontal.
2With the panel horizontal, tighten the lock knobs, then press the release levers and return the panel to the desired position, where it will lock into place.
Chapter 1 Overview 13