Playback
Playback and Recording 3 Chapter
Storing a varying playback speed in memory
To store the playback speed for DMC playback, use the following procedure.
MEMORY indicator
Display section
3,5,71,5 | 6 | 2 | 8 | 3 4 |
1Press the DMC EDIT button, turning it on.
2Either while playing back the recorded tape, or during recording, press the ENTRY/SHIFT button and each of the following buttons simultaneously, to set the start and end points.
•
•Speed variation start point: IN button
•Speed variation end point: OUT button
•
Each press turns the corresponding button on.
3Press the SEARCH button or search dial so that the SHUTTLE indicator in the display section is lit.
4If you want to use the variable mode to set the varying playback speed, press the VARIABLE button, turning it on.
5Holding down the DMC EDIT button, turn the search dial, to set the initial speed at the speed variation start point.
The speed you set appears in the display section. During this period the tape does not move.
6Press the PREVIEW button.
The tape is prerolled and played back at normal speed from the
56 | Chapter 3 Recording and Playback |