Connecting two
For equipment/signal connections and basic settings, see the section “Connections for
Use the following procedure.
(In the following, the controlling unit is referred to as the recorder (this unit) and the controlled unit as the player.)
1 4
7 | 3,6 | 2,5 |
1Press the PLAYER button, turning it on.
2Cue up to the player tape position where to start playback.
3Hold down the ENTRY/SHIFT button, and press the IN button. The player IN point is set.
4Press the RECORDER button, turning it on.
5Cue up to the recorder tape position where to start synchronous playback.
6Hold down the ENTRY/SHIFT button, and press the IN button. The recorder IN point is set.
(Continued)
Playback and Recording 3 Chapter
Chapter 3 Recording and Playback | 59 |