Editing 4 Chapter

Automatic Editing

When the audio IN point is not set for insert editing of audio only

As long as the audio OUT point is set, the VCR is ready for preview or editing. If the audio IN point has not been set, the current tape position is automatically used as the audio IN point.

Using a VCR without a split editing function as the player

If it is not possible to set separate audio and video edit points on the VCR you are using as the player, by setting the audio IN and OUT points on the recorder (this unit), then setting three video edit points, split editing is possible.

Checking Edit Points

You can check the time value for an edit point and the duration between two edit points by displaying them in the display section.

To display the time value for an edit point

Use the following procedure.

Display section

2 1

1Press the RECORDER button or PLAYER button to select the VCR on which you wish to check the edit point.

The button you have pressed lights.

2Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button according to the edit point you wish to check.

While you hold down the button, the time value of the edit point is shown in the display section.

74 Chapter 4 Editing