After selecting an edit mode, you can save on editing time by setting the edit points and previewing (or executing) the edit at the same time.
1 3
2,41Press the PLAYER button, turning it on.
2Stop the tape on the player at the position you wish to make the IN point.
3Press the RECORDER button, turning it on.
4Stop the tape on the recorder at the position you wish to make the IN point.
5Press the PREVIEW button.
A preview starts.
The tape positions determined in steps 2 and 4 are set as the player IN point and recorder IN point, respectively.
6Watching the editing on the monitor, at the position you wish to make the OUT point, hold down the ENTRY/SHIFT button and press the OUT button.
Both the player OUT point and recorder OUT point are set.
7Carry out another preview and modify the edit points as required.
For details of how to modify edit points, see the section “Modifying Edit Points” (page 75).
(Continued)
Editing 4 Chapter
Chapter 4 Editing 89