Playback

This section describes playback of video and audio.

Preparations for Playback

Button/switch settings

Before beginning playback, make any necessary button/switch settings.

For details of the settings of each of the buttons/switches, see the pages indicated in parenthesis.

MONITOR SELECT buttons (page 18): select the audio channels to be monitored.

POWER switch: 1 side

PB controls (page 17): adjust the audio playback levels.

REMOTE button (page 16): unlit

COUNTER SEL button (page 19): select the data to be displayed (see the section “Displayed time data” on this page).

and Recording 3 Chapter

PB button (page 19): lit

TC SELECT switch (page 27): TC or VITC (when displaying time code) (see the section “Displayed time data” on this page)

Time data selection

Displayed time data

Use the COUNTER SEL button to select one of counter’s count (COUNTER), time code (TC), and user bit values (U-BIT). When you select time code, the data displayed is determined by the setting (TC/ VITC) of the TC SELECT switch on the subsidiary control panel as follows.

TC SELECT switch setting

Displayed data

 

 

TC

TC recorded on tape

 

 

VITC

VITC recorded on tape

 

 

Playback

Chapter 3 Recording and Playback

49